The ELI-S-100 Inverter

Emergency Lighting News

The ELI-S-100
The Flexible, Cost-Saving Solution for LEDs in Emergency Lighting

The Philips Bodine ELI-S-100 is available in models ELI-S-100-120V and ELI-S-100-277V, is a battery backup unit that converts LED and fluorescent fixtures into code-compliant emergency lighting sources.

ELI-S-100The ELI-S-100 provides emergency output power of 100W maximum and supports the lighting load for a minimum of 90 minutes. While the ELI-S-100 works with both fluorescent and LED lighting, it offers two important features for LED applications: dimming capabilities and sinusoidal output.

Dimming in LED Applications
ELI-S-100’s dimming feature delivers flexibility and cost savings. The dimming capability allows a higher power fixture to operate at a dimmed 100W maximum emergency-mode lighting level, eliminating reliance on a high power inverter to run the fixture. Alternately, ELI-S-100 allows a string of multiple fixtures to be driven in emergency mode at a combined 100W maximum. For example, five 100W LED fixtures may be connected to one ELI-S-100 and dimmed for emergency operation to 20% of normal power, with each LED fixture supplying 20W of output power (20W x 5 = 100W).

The ELI-S-100 provides a dimming control output of 0-10 volts, and the emergency-mode dimming voltage is field-settable in five steps to provide nominally 20%, 40%, 60%, 80% or 100% light output. The dimming feature requires a dimming AC driver. The feature should not be used with fluorescent applications.

Sinusoidal Output
The ELI-S-100 features an LED-friendly sinusoidal (sine) waveform rather than square waveform output. Sinusoidal waveform is characterized by very low harmonic distortion and by clean power similar to that produced by utility-supplied electricity.

Product Highlights

  • Compatible with LED and fluorescent fixtures
  • Provides 100W maximum emergency power output
  • Features sinusoidal output
  • Offers dimming capabilities (0-10 volts) in LED applications
  • Includes field-settable emergency-mode dimming voltage
    (nominally 20%, 40%, 60%, 80% or 100%) for LED applications
  • May be connected to one or multiple fixtures
  • Supports emergency lighting for a minimum of 90 minutes
  • Remote mounting distance: 250 ft.
  • Dimensions: 12.562” x 9.812” x 4.675”
  • Weight: 25 lbs. with batteries installed
  • UL Listed/CSA Certified


Brochures Spec Sheets Instructions Sheets

Download PDF ELI-S100 Leaflet
Download PDF ELI-S-100
Download PDF ELI-S-100

To learn more about this product family, please contact the Philips Bodine Sales Team at 800.223.5728.

Product List
Lighting Applications

News Archives

Follow Us On YouTube!


Return to Archives